Remove your defective seal or the seal to be replaced in accordance with the maintenance interval specifications and send it to us in its removed state. Alternatively, you can hand in the seals on site during our opening hours.
If you take advantage of our
emergency installation service for agricultural and forestry machinery, we will professionally remove the defective seals for you on request.
Analysis service


Analysis service for gaskets
Do you know this? An ageing system is actually still running very well - so there's no need to buy a new machine. Now it's time for routine maintenance. You should take a special look at the sealing elements of your machine. Maintenance and servicing is extremely important, especially for such areas and systems.
However, the original seals are often no longer available - either because the retention periods have expired or because the manufacturers of the systems no longer exist. Old documents may also be missing or the geometries or dimensions may no longer be traceable in the dismantled state, as the gasket has suffered greatly from the stresses and strains of everyday use. In these cases, it is often difficult to find the right seal and thus extend the usability of your system.
With our analysis service, we offer you the ideal solution: for a small service fee, our expert technical team will help you find the right gasket for your application.
In the event of acute seal defects in agricultural and forestry machinery, we can help you quickly and easily with our emergency installation service.
![]() | Your contactAs part of the technical competence team, I can help you find the right seal for your machine or the right spare part for your product. If you have any questions about selected seals or in advance of our analysis service, I will be happy to help you find the right way to the ideal (spare) part for you. Contact me - I will be happy to advise you! | Alexander Leist Analysis expert Phone +49 6251 8415 0 sales@magnuseals.com |
![]() | Your contactAs part of the technical competence team, I can help you find the right seal for your machine or the right spare part for your product. If you have any questions about selected seals or in advance of our analysis service, I will be happy to help you find the right way to the ideal (spare) part for you. Contact me - I will be happy to advise you! | Michael Gärtner Analysis expert Phone +49 6251 8415 12 sales@magnuseals.com |
![]() | Your contactDo you have specific questions about technical components or your current project? Do you need a solution for a new product development or further development of existing products? I will be happy to help you and support you with all technical questions relating to sealing technology. Contact me - I look forward to talking to you! | Philipp Rindfleisch Technical advisor and analysis expert Phone +49 6251 8415 22 sales@magnuseals.com |
Process
Removing the seal
Material analysis
After receiving the removed samples, the gaskets are measured, analyzed and specified and the material quality is determined. Our technical competence team will then contact you to discuss further application parameters.
Spare parts inspection
Our gasket experts check the product range for original parts or find suitable original spare parts for your gasket. We also take delivery and, if necessary, production options into account in order to find the optimum product for you.
Delivery
Together with you, our gasket experts will make a sensible selection for your spare part based on quality and economic aspects. We will deliver it to your company address on time or you can collect it from us on site during opening hours.
Frequently asked questions
How do I find a replacement for a seal whose manufacturer no longer exists?
Through our analysis service. You send us the removed seal, our technical expert team measures and analyses it, determines the material quality and identifies a suitable replacement part. That way your equipment stays usable even when the original no longer exists.
Can a seal be identified without manufacturer details or a drawing?
Yes. Missing documentation is no obstacle: we determine the dimensions and material ourselves from the removed sample. That is exactly what the analysis service is for when old drawings or data sheets are no longer available.
What can I do if the original seal is no longer available?
If the original seal is no longer available, our analysis service determines a technically suitable replacement solution. To do so, the existing seal is examined in terms of geometry, dimensions, material, hardness and wear pattern, along with the relevant operating parameters such as pressure, temperature, medium and type of movement. On this basis we recommend a compatible standard seal or, if required, develop a custom replacement seal.
Can a heavily worn seal still be analysed?
Yes. Even when geometry and dimensions are no longer clearly recognisable due to wear, we determine the original specifications through material analysis and measurement. We then clarify the remaining application parameters with you.
How does the analysis service work?
In four steps:
- You remove the seal and send it in or drop it off on site.
- We measure, analyse and specify it.
- Our experts check our range for the original or a suitable replacement part.
- We deliver on schedule or you collect it on site.
What does the analysis service cost?
The service is carried out for a small service fee. We clarify the specific terms in advance, and you can book a free appointment to discuss it directly.
Do I have to send the seal in or can I bring it in person?
Both are possible: send it in once removed, or drop it off on site during our opening hours. For acute failures on agricultural and forestry machinery, we will remove the seal properly for you on request via our emergency installation service.
Will I get an original part or a replacement product?
We first check whether the original part is available. If it is no longer available, we identify a technically suitable replacement part. We make the final selection together with you, taking technical, quality and commercial criteria into account.
Is there fast help for an acute seal failure on agricultural or forestry machinery?
Yes, that is what the emergency installation service is for. In the case of acute failures we help quickly and, on request, take care of proper removal. You will find the details on the emergency installation service page.
Removing the seal
Remove your defective seal or the seal to be replaced in accordance with the maintenance interval specifications and send it to us in its removed state. Alternatively, you can hand in the seals on site during our opening hours.
If you take advantage of our
emergency installation service for agricultural and forestry machinery, we will professionally remove the defective seals for you on request.
Material analysis
After receiving the removed samples, the gaskets are measured, analyzed and specified and the material quality is determined. Our technical competence team will then contact you to discuss further application parameters.
Spare parts inspection
Our gasket experts check the product range for original parts or find suitable original spare parts for your gasket. We also take delivery and, if necessary, production options into account in order to find the optimum product for you.
Delivery
Together with you, our gasket experts will make a sensible selection for your spare part based on quality and economic aspects. We will deliver it to your company address on time or you can collect it from us on site during opening hours.



